Handmade fishing lures - Mold making - Prototyping plastic

I just discovered my new favourite substance.

It's even better than PVC.

Maybe it is PVC.

I don't know.

I was in my local electronics store checking switches, and was sold some of this stuff.

It's plastic that you can warm up and shape.

You need to get it to around 65 degrees c before it melts into itself.







Once hot, you can shape it into anything you can think of.

Pictured here is a bit I squeezed.

It retains fine detail like fingerprints, and when dry, it sets white like the beads again.

It sets to a strong plastic with a little flex, a lot like a soft drink (soda) bottle cap.




My first use was to make a very specific battery pack that didn't exist as far as I could tell.  It's great to work with, and totally recyclable. You just drop it back into hot water, and it re-melts.

I would guess you have around a minute to work with where you can press two bits together and they form one. And perhaps another minute where you can still shape it, but pressing two bits together wouldn't quite become one.

If you need more time to work it, you just put whatever you've half made back into hot water and it softens again.

Very cool stuff that I think I'm going to need to buy in bulk.



120 Things in 20 years is excited about making handmade fishing lures, and just general prototyping  In reality, I have no idea what I'll do with it, but it's exciting just knowing about it. I'm easily excited.

6 comments:

  1. Wondering if you could ask the local electronics shopkeeper, what is the actual name of the plastic pellets? Might be a while before I make it to AU. thanks.
    mbelluso@hotmail.com mbelluso@gmail.com

    ReplyDelete
  2. from wikipedia - Polycaprolactone

    http://en.wikipedia.org/wiki/Polycaprolactone

    PCL also has many applications in the hobbyist market (sold under various tradenames, such as "InstaMorph", "Friendly Plastic", "ShapeLock", "PolyMorph", "Plastimake", "Protoplast", "Plaast" etc.).

    ReplyDelete
  3. This comment has been removed by a blog administrator.

    ReplyDelete
  4. This is some of my favorite stuff in the whole world. The stuff I make with it is always rather crude and lumpy, but also strong and useful. You can get colorant additives for it now, too, if you happen to want your crude lumpy strong useful stuff to also be colorful.

    ReplyDelete
    Replies
    1. Nice.
      It's always good to add a bit of colour.
      What are you making with it? I figured you'd be 3D printing everything

      Delete

Popular Posts