Electronics - New fish lever switch

I was wandering around wondering in an electronics store today, and found a new, even better switch  for my fish activated lever on my demand fish feeder.

It looks like this.

The one on the left is what I'm using now, and I had to glue some tubing on it so that it looked more like the one on the right.

The one on the right already looks absurd without my having to glue anything to it at all.

I have no idea why someone would need an inch long press button switch.

Unless they were using it as a fish lever.





I mentioned to the owner that the switches could be triggered with sideways pressure.

He didn't know that.

It seems the manufacturer didn't intend it, and it is just a pleasantly useful side affect of the manufacturing process. .





120 Things in 20 years - Getting ever close to filling up my brain with new facts about electronics and absurdly long new fish lever switches for my aquaponics demand feeder.

Electronics - Aquaponics - Demand feeder fish lever build

I spent some time in an electronics store testing long buttoned momentary switches.

They all seem to work when you tilt the button to the side as well as when you press the button normally. Perhaps they are designed to work that way after all.

Thanks button maker.

I had a bit of a breakthrough with the entire lever, and not just the switch part. I found this fishing float had a white plastic bit that almost fit over the momentary switch's button.

That's the switch lower right.

The white plastic thing was hollow, but needed a slight enlargement with a hand held drill.

The button went in with a snug fit, and the white thing was really their just to give me some surface area glue onto.

The new lever incorporated a second fishing float as the stem, and as a nice bulb for the fish to hit.

The float stem has a bit of flex to it, so it should be forgiving if a fish hits it hard.

It looked lie this when built.

I glued it in place with super glue, and held it while it dried with what to me looks like a naked chicken with a fist for a head.

So now my device looks like this.

It also works.

I turned it on, and while I was putting a cover over the fish tank, the bigger of my two fish hit the lever and got a feed.

I did have the camera running, but the video was too dark to post, but the switch and lever worked perfectly.

I count this as a success!











120 Things in 20 years suggests you never try to take your electronic aquaponics demand feeder on a plane with you, unless you feel like explaining it for a few hours.

Electronics - Aquaponics - Demand feeder lever

Probably the most difficult single thing to deal with in making my demand feeder has been working out the lever.

But as usual I called upon chance to solve it for me.

Thanks chance.

For some reason I remembered playing with a switch I bought when I was making the first version of this demand feeder. The switch was one that is a button, and turns on then off again after you lift your finger.

It's sideways click seemed nice to the touch.

The one pictured (centre front) is the same, but is on an old circuit board. I cant find my original version.



It's quite long for a momentary switch.


The interesting thing about these particular, particularly long momentary switches, is they they do their switching thing if you tilt the button to the side rather than just press it. I just tested this one and it works.

They also work if you press it, but it's the sideways switchyness that interests me. It should be perfect as the lever the fish hit, because they can hit it from any direction and it should trigger.




Now all I need to do is figure out which brand they are, and if they all work like that. It might be the case that only some of them do this. It might be a manufacturing error rather than a feature.

Perhaps manufacturing error is too harsh.

Perhaps manufacturing  tolerance would be better.

Either way, I might be able to use it.



120 Things in 20 years - As luck might have it, for the next few days, you might find me in electronics stores with a multimeter, trying to find a switch for my electronic, aquaponics demand feeder lever.

Electronics - Aquaponics - Demand feeder hits

It turns out the fish have been hitting the lever, but the switch hasn't been working.

It should be an easy fix, but for the time being, this will have to do.

[edit from the future - I fixed the switch and got a few proper hits with feed delivered within a few hours]

Electronics - Infinite battery life camera

I've had to make a few compromises with version 2.0 of the demand feeder.

One is that I've re-written the code and made it a lot more simple than it was originally. I've still got the old code, and I'll use it and post it when I make it a little better, but the full version resets each day at dawn as one of the overfeeding protection measures. I only have two silver perch in a 100L fish tank, with 300L of filtration media, so they can have as much feed as they like. To encourage the pressing of the button, I've made it so that they only get a small amount of feed each time, but they have the opportunity of more feed after only eight minutes since the last feed. The point of making a simpler version of the software was so that it would keep a running total of all events like the number of times the fish have hit the feed lever when the light is lit, and the number of times when the light isn't lit.

The fish pressed the lever only once in the 24 hours since I added it to the system. This may have just been a tail swipe, but it would have delivered feed, so some reinforcement of the behaviour of getting at least near the lever has begun!

It wont take them long to get the hang of it.

I ran the camera until the batteries were dead last night, but the hit must have happened some time since dawn while the camera was on charge. To solve this two hour filming limit, I created this.

It's a camera taped to it's battery charger, that is in turn taped to a tripod.

I plugged it into the earth leakage safety switch that the rest of the system is plugged into.



It blends in a bit with the actual feeder, but that's the feeder with the birds nest of wires sticking out of the back of it. The orange looking light under the camera is the LED that tells the fish feed is currently available. The red light at the top is the power on LED, and the yellow one is flashing out the number of feeds allowed in a day (even though the thing no longer resets after a day, so really it shows the number of feeds allowed ever). There are also LED's that flash out the number of feeds so far, the feeds remaining, the number of attempts made at the lever when food isn't available. That is when the feed LED isnt lit, because they just fed recently. And one more that flashes out the size of each feed that's delivered. The size is measured by how long the motor is on for, and doesnt actually represent the amount of feed, but on average, should spill a predictable amount each time. Currently, they would get around 5-8, 3mm pellets each time they hit the lever.

Hopefully, I'll have some video soon.



120 Things in 20 years - Electronics - Infinite battery life camera - This project is far from finished.

Electronics - Reasonable success milestone

What's pink and white, and looks a bit like a short alien under stage lighting, talking to a tall man with a diode for an upper leg, and a friend with a paper bag over his head?

Nope.

Too much Christmas spirit.

120 Things in 20 years - Electronics - Demand feeder diorama 

120 Things in 20 years - As at 2012 12 24 23:56 my demand feeder actually works (if you include a light where a motor should be as "working" (which I do)). I declare this point in time , an Official reasonable electronics success milestone.