I've started work on the electronics and programming of my new demand feeder.
I also found my cardboard fish from the first version demo on youtube, so I thought I'd re-make the video with the new chip and this time, a counter that flashes the number of illegal attempts to get food. There will be another counter to flash feeds and a few others.
But for now, here is where I'm at so far....
I'm feeling a lot more confident this time with a little better understanding of the electronics involved.
120 Things in 20 years - I'd better get back to my Electronics - Aquaponics - Demand feeder 2 breadboard
Subscribe to:
Post Comments (Atom)
Popular Posts
-
You see CHIFT PIST a lot in the aquaponics forums and it means "constant height in fish tank, pump in sump tank". And its a very g... -
The bell siphon was a clever thing for someone to design, and as such you feel a bit of that "clever" rub off onto you when you m... -
A "bell siphon" is a device that automates the flooding and draining of an aquaponics grow bed, even though the pump is adding wa... -
Apparently, marron come in two varieties. Hairy and not so hairy. Cherax cainii (smooth) and Cherax tenuimanus, or Margret River marron (hai... -
A while ago I tried to make a fish fed fish feeder design that would allow the fish to feed themselves. I think It's made. I say ... -
Painting lures is easier if you don't know how. I don't, so I'm already well on my way. I started by owning a printer. That ... -
The good thing about growing things like potatoes in aquaponics is they grow like crazy. The problem with growing things like potatoes in ... -
Wire is one of the greats. It's power lies in its ability to be made shorter and apply great tension, with the application of many small... -
With a little practice its possible to make a screw. If you bend your wire into an eyelet, its possible to make a screw in eyelet. The use... -
If you pump air down into a submerged tube, when the bubbles rise to the surface, by virtue of the fact that they take up some space, they c...
No comments:
Post a Comment