I've been worried about all my dodgy electronics on my solar boat, so I figured I should have a master kill switch that couldn't fail, and came up with a fuse holder and a 6mm bolt, tied to some artfully arranged paracord in the form of a survival bracelet that my brother made for me.
Cut the threaded bit off the bolt, tie a nice grippy paracord handle to it, then put the bolt in the fuse holder that connects all the electrics to the positive terminal.
One pull and everything stops.
It should work.
If it does, I should also be able to clip onto it with with a 2m bungee cord when I want to move around the boat if I'm under way. That way if I fall off, the motor will stop. I think it's called a dead man's switch. I was originally planning to create one digitally, and I still might if it turns out to be a pain, but if I need it, I'll build it on the boat. If I did it digitally, I'd make a simple sonic tape measure with a PICAXE chip that would notice if I left my chair. Then it would beep in 60 seconds, then kill all power to the motor if I didn't wave my hand in front of it within 15 seconds.
I think I prefer paracord and my bolt fuse.
120 Things in 20 years realises a solar deadman's switch sounds like safety overkill, but I'll have junk everywhere, no side rails, and 2000km is a long way to chase a boat moving slightly faster than I can swim on the Murray River.
It's my intention to gain a new ability every 2 months for the next 20 years. I'd enjoy some company, some help, and some constructive criticism.
Things so far...
Animation
(5)
Aquaponics
(340)
Bread
(15)
Cheese
(16)
cooking
(49)
electronics
(57)
Epic adventurer
(20)
Escargot
(2)
Fire
(6)
Fraudster
(1)
Handmade fishing lures
(31)
Home made preserves
(11)
Making smoked foods
(11)
Mold making
(7)
Movie watcher and critic
(2)
Photography
(17)
PVC
(36)
Snail farming
(6)
Solar hot water
(26)
Solar photovoltaic panels
(7)
Stirling Engines
(11)
Thinking
(52)
Vermiculture
(1)
Wind energy
(26)
Subscribe to:
Post Comments (Atom)
Popular Posts
-
You see CHIFT PIST a lot in the aquaponics forums and it means "constant height in fish tank, pump in sump tank". And its a very g...
-
The bell siphon was a clever thing for someone to design, and as such you feel a bit of that "clever" rub off onto you when you m...
-
A "bell siphon" is a device that automates the flooding and draining of an aquaponics grow bed, even though the pump is adding wa...
-
Apparently, marron come in two varieties. Hairy and not so hairy. Cherax cainii (smooth) and Cherax tenuimanus, or Margret River marron (hai...
-
A while ago I tried to make a fish fed fish feeder design that would allow the fish to feed themselves. I think It's made. I say &q...
-
Painting lures is easier if you don't know how. I don't, so I'm already well on my way. I started by owning a printer. That ...
-
The good thing about growing things like potatoes in aquaponics is they grow like crazy. The problem with growing things like potatoes in ...
-
Wire is one of the greats. It's power lies in its ability to be made shorter and apply great tension, with the application of many small...
-
With a little practice its possible to make a screw. If you bend your wire into an eyelet, its possible to make a screw in eyelet. The use...
-
If you pump air down into a submerged tube, when the bubbles rise to the surface, by virtue of the fact that they take up some space, they c...
It would be perfectly acceptable to use both you know.
ReplyDeleteOverkill, kill-switch.
ReplyDeleteIt does have a ring to it :)
I probably should do both, if for no other reason than because I can.
I'm learning about stepping motors as I type for that very reason.