As mentioned earlier I thought I'd see how densely I could plant bean seeds before they started to suffer.
To this end I've planted different numbers of bean seeds in plastic cups to be grown in my NFT tubes.
I started with six of my standard plastic drinking cups with holes drilled in the bottom to allow water to flow through. If you make some, don't forget you can drill a stack of ten at a time.
I added one, two, four, eight, sixteen, and thirty two seeds to each cup in turn.
They will grow to seedling size in my little seed raising grow house, until they are big enough that their roots will reach down to the water in my NFT tubes.
I tend to wait until the first signs of their real leaves rather than the two first leaves that the seed turns into. In previous tests where I've pulled up seedlings, I've noticed that by the time their first real leaves appear, their tap roots are well developed and reach the bottom of the cups. This seems to apply to every variety I've tested.
I guess roots are pretty important things to grow first. Plants manage for quite a while without light, but only hours without water.
With a lot of small seeds I don't bother covering them as their is a steady rain of water from the roof of my little grow house, but with the bean seeds I worry that they might dry out as they stand up much higher than the damp media, so I cover them with scoria.
I water them with fish tank water, and on this occasion I added a little seasol ( a seaweed extract plant tonic) because there are going to be a lot of seedlings and I don't want them begging for trace elements.
The fish tank water stands around an inch deep or a third of the way up the cups.
There is also a pot with my twice weekly lettuce planting, an experimental seed raising method that I'll talk about later, and also an additional cup with 20 pea seeds buried because I love peas.
I've only just done this, so it's going to be a while before I can report results.
Unfortunately this isn't going to be a case of "and here's one a made earlier".
120 Things in 20 years - Still trying to rob perfectly innocent giants of their golden egg laying livestock with Aquaponics - Bean seed density experiments in an attempt to build a better magic bean scaffolding.
It's my intention to gain a new ability every 2 months for the next 20 years. I'd enjoy some company, some help, and some constructive criticism.
Things so far...
Animation
(5)
Aquaponics
(340)
Bread
(15)
Cheese
(16)
cooking
(49)
electronics
(57)
Epic adventurer
(20)
Escargot
(2)
Fire
(6)
Fraudster
(1)
Handmade fishing lures
(31)
Home made preserves
(11)
Making smoked foods
(11)
Mold making
(7)
Movie watcher and critic
(2)
Photography
(17)
PVC
(36)
Snail farming
(6)
Solar hot water
(26)
Solar photovoltaic panels
(7)
Stirling Engines
(11)
Thinking
(52)
Vermiculture
(1)
Wind energy
(26)
Subscribe to:
Post Comments (Atom)
Popular Posts
-
You see CHIFT PIST a lot in the aquaponics forums and it means "constant height in fish tank, pump in sump tank". And its a very g...
-
The bell siphon was a clever thing for someone to design, and as such you feel a bit of that "clever" rub off onto you when you m...
-
A "bell siphon" is a device that automates the flooding and draining of an aquaponics grow bed, even though the pump is adding wa...
-
Apparently, marron come in two varieties. Hairy and not so hairy. Cherax cainii (smooth) and Cherax tenuimanus, or Margret River marron (hai...
-
A while ago I tried to make a fish fed fish feeder design that would allow the fish to feed themselves. I think It's made. I say &q...
-
Painting lures is easier if you don't know how. I don't, so I'm already well on my way. I started by owning a printer. That ...
-
The good thing about growing things like potatoes in aquaponics is they grow like crazy. The problem with growing things like potatoes in ...
-
Wire is one of the greats. It's power lies in its ability to be made shorter and apply great tension, with the application of many small...
-
With a little practice its possible to make a screw. If you bend your wire into an eyelet, its possible to make a screw in eyelet. The use...
-
If you pump air down into a submerged tube, when the bubbles rise to the surface, by virtue of the fact that they take up some space, they c...
No comments:
Post a Comment